 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Fiber Optics Plastic Fiber Optic Phototransistor Detector Plastic Connector Housing SFH350 SFH350V Features * 2.2 mm Aperture holds Standard 1000 Micron Plastic Fiber * No Fiber Stripping Required * Good Linearity * Sensitive in visible and near IR Range * Molded Microlens for Efficient Coupling Plastic Connector Housing * Mounting Screw Attached to the Connector * Interference Free Transmission from light-Tight Housing * Transmitter and Receiver can be flexibly positioned * No Cross Talk * Auto insertable and Wave solderable * Supplied in Tubes Applications * * * * Household Electronics Power Electronics Optical Networks Light Barriers Type SFH350 SFH350V Data Sheet 1 Ordering Code Q62702-P1033 Q62702-P0264 2004-03-19 SFH350 SFH350V Technical Data Technical Data Absolute Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Soldering Temperature (2 mm from case bottom, t 5 s) Collector-Emitter Voltage Collector Current Collector Peak Current (t 10 s) Emitter-Bias Voltage Reverse Voltage Power Dissipation TA = 25C Thermal Resistance, Junction/Air Symbol Limit Values min. max. +85 +100 260 50 50 100 7 30 200 375 C C C V mA mA V V mW K/W -40 -40 Unit TOP TSTG TS VCE IC ICP VEB VR PTOT RthJA Data Sheet 2 2004-03-19 SFH350 SFH350V Technical Data Characteristics (TA = 25C) Parameter Maximum Photosensitivity Wavelength Symbol min. Smax 400 1 ( 10) Values typ. 850 1100 max. nm nm nA Unit Photosensitivity Spectral Range (S = 10% Smax) Dark Current (VR = 20 V) Capacitance (f = 1 MHz, without light) (VCE = 0 V) (VCB = 0 V) (VEB = 0 V) Rise and Fall Times of Photo Current (RL = 1 k, VCE = 5 V, IC = 1.0 mA, = 959 nm) 10% to 90% 90% to 10% Current Gain Collector Dark Current (VCE = 5 V) Photo Current (VCE = 5 V, IN = 10 W coupled from the end of a plastic fiber, = 660 nm) Temperature Coefficient HFE Temperature Coefficient ICE = 560 to 660 nm Temperature Coefficient ICE = 830 nm Temperature Coefficient ICE = 950 nm IR CCE CCB CEB 10.5 21.5 20.5 pF tR tF HFE 20 20 500 2 ( 50) 0.8 ( 0.16) s ICE0 ICE nA mA TCHFE TCI 0.55 0.34 0.49 0.66 %/K %/K Data Sheet 3 2004-03-19 SFH350 SFH350V Technical Data Relative Spectral Sensitivity Srel = f() Capacitance C = f(VR), f = 1 MHz, EV = 0 Photocurrent IC = f(OUT), VCE = 5 V, = 560...950 nm Current Gain HFE = f(IC), VCE = 5 V, TA = 25C Data Sheet 4 2004-03-19 SFH350 SFH350V Technical Data Output Characteristics IC = f(VCE), IB = parameter Response Time t = f(IC), VCC = 5 V, = 950 nm Photocurrent IC/IC25 = f(TA), VCE = 5 V, = parameter Current Gain HFE/HFE25 = f(TA), VCE = 5 V, IC = 1 mA Data Sheet 5 2004-03-19 SFH350 SFH350V Package Outlines Package Outlines SFH350 Dimensions in mm E K B File: 4203 Figure 1 SFH350V Dimensions in mm File: 4204 Figure 2 Data Sheet 6 2004-03-19 SFH350 SFH350V Revision History: Previous Version: 2004-03-19 2002-03-14 DS1 Edition 2004-03-19 Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 Munchen, Germany (c) Infineon Technologies AG 2004. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. |
Price & Availability of SFH350V
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |